Get eyecandy here
Get my canvas here
Get my supplies
here
Click on the right leg layer.
go to selection- load from alpha channel- right leg.
Open the wood fill- flood fill with wood fill at angel 90.
Deselect. Go to eyecandy 3 inner bevel.
Use these settings.
Click on the left leg layer.
Go to selection- load from alpha channel- left leg.
Flood fill with wood fill at angel 90.
Deselect. Go to eyecandy 3 inner bevel- same as above.
Click on the main layer.
go to selection- load from alpha channel- main.
Flood fill with wood fill at angel 90.
Deselect.
Apply eyecandy 3 inner bevel.
Go to select all- float- modify -contract by 10.
Flood fill again with the wood fill.
Go to selections - float- and apply a cutout using these settings-
vertical 1
horizontal 1
opacity 100
blur 21.3
color #3D2E29
We will use this same cutout throughout the tutorial.
Click on the top layer.
Go to selection- load from alpha channel- top.
Flood fill with wood fill at angel 90. Deselect.
Apply the eyecandy 3 inner bevel.
Open the marble fill.
Click on the top layer.
Go to selection- load from alpha channel- top.
Flood fill it with the marble fill at 25%
Deselect.
Click on the left top drawer layer.
Go to selection- load from alpha channel- left top drawer.
Flood fill with the wood fill at 90 angel.
Use the same eyecandy bevel.
Go to select all- float -modify -contract by 15.
Flood fill again with wood fill and apply the same cutout.
Deselect and apply the same eyecandy bevel again.
Click on the right top drawer layer.
Go to selection- load from alpha channel- right top drawer.
Finish the same as the left top drawer.
Use the following procedure for these layers.
Flood fill with wood fill and use same eyecandy inner bevel.
side board 1
side board 2
Click on the bottom drawer 1 layer.
Go to selection- load from alpha channel- bottom drawer 1.
Flood fill with wood fill.
Deselect.
Apply the same eyecandy bevel.
Select all- float -modify- contract by 10.
Flood fill with the wood fill and use the same cutout.
Deselect and go to eyecandy 3 bevel again.
Click on the bottom drawer 2 layer.
Go to selection- load from alpha channel- bottom drawer 2.
Finish as above.
Click on the side board 3 layer, go to selection-
load from alpha channel- side board 3.
Finish as above.
Click on the bottom layer.
Go to selection- load from alpha channel- board.
Flood fill with wood fill.
Deselect
Apply the same eyecandy bevel
Click on the right top deco.
Go to selection- load from alpha channel- right top deco.
Flood fill with wood fill.
Deselect.
Apply the same eyecandy bevel.
Click on the left top deco.
Go to selection- load from alpha channel- left top deco.
Finish as above.
Click on the side board 4.
Go to selection- load from alpha channel- side board 4.
Finish as above.
Click on the top 2.
Go to selection- load from alpha channel- top 2.
Finish as above.
Click on the deco 1 layer.
Go to selection- load from alpha channel- deco 1.
Flood fill with wood fill. Go to selections - float
and apply the same cutout
Click on the deco 2 layer.
Go to selection- load from alpha channel- deco 2.
Flood fill with wood fill. Go to selections - float
and apply the same cutout
Open my psp handle and copy and paste as a new layer.
Duplicate and place one on each drawer.
You should have four,
then copy 1, rotate it 90 degrees and place it on one of the doors.
Duplicate and mirror that layer and line that handle up on the other door.
Use the graphic on the top of the page as your guide.
Open my hinge psp.
Copy as a new layer and move it into place.
Duplicate it 3 time and move the hinges into place.
When you are happy with your hutch merge visible.
Resize by 80%.
As always- don't forget to go to effects- sharpen,
and sharpen once to keep your graphic from becoming blurry.
Hope you like this tutorial.
If you have any questions please e-mail me here
Back to my tutorials here
Home